ASCENT PETROCHEM HOLDINGS CO., LIMITED
Section

Products

Sodium Lauryl Ether Sulfate (SLES)

    • Product Name: Sodium Lauryl Ether Sulfate (SLES)
    • Chemical Name (IUPAC): Sodium 2-(dodecyloxy)ethanesulfonate
    • CAS No.: 68585-34-2
    • Chemical Formula: C12H25(OC2H4)nOSO3Na
    • Form/Physical State: Liquid
    • Factroy Site: Yudu County, Ganzhou, Jiangxi, China
    • Price Inquiry: sales10@ascent-chem.com
    • Manufacturer: ASCENT PETROCHEM HOLDINGS CO., LIMITED
    • CONTACT NOW
    VTB
    Specifications
    HS Code 170335
    Chemical Name Sodium Lauryl Ether Sulfate
    Abbreviation SLES
    Cas Number 9004-82-4
    Molecular Formula C12H25O(CH2CH2O)nSO3Na
    Appearance Clear to slightly yellowish viscous liquid or white powder
    Odor Mild, characteristic
    Solubility In Water Highly soluble
    Ph Value Typically 5.5 to 8.5 (1% solution)
    Active Content Typically 28%-70% by weight
    Surface Tension Lowers surface tension of water
    Biodegradability Readily biodegradable
    Primary Use Surfactant in cleaning and personal care products
    Stability Stable under normal conditions
    Density Around 1.05 g/cm³ (for 70% solution)
    Flash Point >100°C (aqueous solution)

    As an accredited Sodium Lauryl Ether Sulfate (SLES) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing 25 kg net weight blue HDPE drum with secure screw cap, labeled "Sodium Lauryl Ether Sulfate (SLES)" and safety instructions.
    Container Loading (20′ FCL) 20′ FCL of Sodium Lauryl Ether Sulfate (SLES): typically loaded in 165-170 drums (200kg each) or 22-23 IBCs (1000kg each).
    Shipping Sodium Lauryl Ether Sulfate (SLES) is typically shipped in sealed drums, IBC tanks, or bulk containers to prevent contamination and moisture absorption. It should be handled as a non-hazardous material, kept away from strong acids and oxidizers, and stored in cool, dry, well-ventilated conditions during transport.
    Storage Sodium Lauryl Ether Sulfate (SLES) should be stored in tightly closed containers in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources. Ensure the storage area is free from incompatible substances such as strong oxidizing agents. Proper labeling and secondary containment are recommended to prevent spills and environmental contamination. Avoid contact with skin and eyes during handling.
    Shelf Life Sodium Lauryl Ether Sulfate (SLES) typically has a shelf life of 12 to 24 months when stored in cool, dry conditions.
    Application of Sodium Lauryl Ether Sulfate (SLES)

    Applications of Sodium Lauryl Ether Sulfate (SLES) in Industrial Manufacturing

    As a direct manufacturer, we enable bulk users to capitalize on SLES’s high-activity surfactant properties across strictly validated industries. Below, we outline key downstream integration scenarios, each reflecting actual market deployment, strict regulatory requirements, and precise processing details essential for large-scale formulation and QA-conformant manufacturing.

    1. Household and Industrial Liquid Detergent Manufacturing

    Liquid detergent producers use SLES as the main anionic surfactant in both home and institutional cleaning formulas, where its controlled foaming and emulsification profile supports removal of organic and oily soils without damaging sensitive surfaces. Commercial scale blending tanks receive SLES in slurry or paste form, post-metered into water bases along with co-surfactants. This stage often requires close monitoring of pH and salt content throughout mixing to maintain batch-to-batch uniformity, due to customer-driven viscosity and clarity targets. Finished products range from consumer dishwashing liquids to bulk floor cleaners shipped in IBCs.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    2. Personal Care and Cosmetic Cleansers

    Major global and local brands incorporate SLES as a primary wetting and foaming agent in mass-market shampoos, facial cleansers, and shower gels. The raw material undergoes compounding in GMP-compliant cosmetic plants, often with co-formulants to moderate skin feel and reduce irritancy. Granulated or paste SLES is charged into batch tanks after water, then heated and blended with amphoteric or non-ionic surfactants, followed by viscosity modifiers. Quality control involves batch-specific microbiological and stability testing, especially for leave-on and rinse-off applications.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    3. Textile Wetting and Scouring Agents

    SLES finds targeted use in textile auxiliaries, particularly in the pre-treatment phase where controlled wetting, dispersion, and soil removal are central to fabric preparation prior to dyeing or finishing. Producers formulate textile wetting agents with SLES to achieve rapid wet-out and uniform penetration on cellulose and synthetic fibers. Dosing depends on substrate and water hardness, with integration typically via dosing pumps into scouring or desizing baths. Application processes require low-foam variants to prevent overflow and ensure system compatibility.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    4. Industrial Foam Control and Firefighting Foams

    SLES serves as a key component in the generation of stable, high-expansion foams for fire control—especially in Class A and Class B firefighting concentrates and some foam stabilizers for industrial water treatment. Downstream formulators use SLES for controlled expansion and persistence, balancing spreadability and drainage rates to optimize extinguishing capability. Addition occurs in batch foam concentrate mixing vats, with quality checks for surface tension and biodegradability prior to filling. Processing lines frequently incorporate real-time conductivity and viscosity monitors.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    5. Oilfield Drilling Mud and Stimulation Fluids

    In the energy sector, process chemical providers adopt SLES in water-based drilling muds and well stimulation fluid packages to control foaming, enhance wettability, and maintain rheology under varying salinity and temperature. Onsite blending units meter the surfactant in at the premix stage to prevent mud viscosity loss and improve drill cuttings removal. Usage rates fluctuate based on well type, mud composition, and geological conditions, and QA logging ensures batch traceability for compliance during field service audits.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    6. Hard Surface Industrial Cleaners and Metal Degreasers

    SLES supports the formulation of penetrant and emulsifying agents in alkaline and neutral pH industrial cleaning systems, where its balance of soil suspension and rinseability is utilized for removing metalworking fluids, carbon deposits, or food residues in factories. Manufacturers incorporate the material in blending vessels with chelators, silicates, and solubilizers, allowing precise adjustment based on contamination and cleaning method (e.g., manual, spray, or immersion). Consistent bulk QA includes analysis for unsulfonated materials and turbidity checks to meet multipurpose cleaner specs for mechanical and food-grade equipment.

    Industry compliance standards

    Typical usage ratio

    Downstream process integration

    Final product types

    Free Quote

    Competitive Sodium Lauryl Ether Sulfate (SLES) prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618963613625 or mail to sales10@ascent-chem.com.

    We will respond to you as soon as possible.

    Tel: +8618963613625

    Email: sales10@ascent-chem.com

    Inquiry

    Get Free Quote of ASCENT PETROCHEM HOLDINGS CO., LIMITED

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Sodium Lauryl Ether Sulfate (SLES): An Insider’s View from the Manufacturer

    Real Chemistry Shaping Modern Cleaners

    On the production floor, we see firsthand what SLES achieves for household and industrial formulas. Our team has watched the evolution of surfactant technology and we’ve drawn our lessons directly from each drum, batch, and customer feedback sheet. SLES, which carries the CAS number 9004-82-4, has been the pillar of our liquid cleaning lines for years. In an industry that never sits still, SLES continues to offer the reliability our clients return for season after season.

    Behind the Formula: How SLES Performs

    SLES stands out because of its molecular backbone: an ethoxylated lauryl alcohol with a sulfate group, usually delivered as a 70% active content paste or in more diluted solutions, depending on end use. Its chain structure brings together the cleaning power of a true alkyl sulfate and the mildness introduced by ethoxylation. Compared to classic sodium lauryl sulfate, SLES keeps irritation low without sacrificing foam or detergency.

    As manufacturers, we notice the preference for 70% SLES in detergent formulations, especially where viscosity tuning helps the end-result. Powders and granules with similar surfactants often fall short due to their incomplete wetting and slower dissolution. Our continuous process reactors deliver lot-to-lot consistency, ensuring each shipment of SLES mirrors the texture and clarity required by filling lines and formulation tanks.

    On the Line: Observations from Direct Production

    Our technicians fill tanks with hundreds of tons a week, and every run is tracked for active matter content, specific gravity, and unsulphated alcohol levels. Each batch runs through quality checks, because the risks of unreacted matter or excess by-products bear direct impact on downstream performance. You cannot mimic the assurance that comes with batch testing your own output at every step. Contractors, blenders, and distributors cut corners with spot-checking and secondary blending; we control the real heart of SLES chemistry, batch after batch.

    Minimizing salt content (sodium chloride and sodium sulfate) poses a tangible challenge. On our lines, tighter control during neutralization stages with sodium hydroxide helps keep the inorganic content in check. Product clarity and pourability depend heavily on these tweaks, making life easier for the thousands of clients who value crystal-clear, pumpable surfactant every time.

    Model and Specifications: What Matters in Practice

    Numbers carry little meaning without context. SLES comes most often as a concentrated, slightly viscous liquid or paste. The industry recognizes 70% as a preferred grade, though customers request lower concentrations for specific blend stocks. Fine differences in ether chain length (usually 2 or 3 moles of ethylene oxide) affect a batch’s feel, not just its reactivity. We tune chain lengths to match the viscosity, foaming, and mildness profile clients expect.

    Adjusting the ethoxylation degree gives a measure of flexibility—too little, and skin irritation climbs; too much, and detergency slips. On this balance rides countless hours of pilot plant trials and field feedback. Some formulas call for SLES that pours well at low temperature without gelling or separating. The “salt curve” is a term formulators live by; watch it carefully, and the difference shows up in every detergent bottle’s pour.

    Where SLES Beats Its Rivals: A Straight Comparison

    Anyone who works inside a chemical manufacturing plant eventually gets first-hand troubleshooting calls. Clients often ask why SLES outperforms sodium lauryl sulfate or non-ionic surfactants. The truth: sodium lauryl sulfate gives harsher cleaning, quick lather, but more skin reactivity. In low-dilution washes or hand-wash applications, this difference sparks complaints and returns. SLES contains the same cleaning punch but delivers a softer impact, with consistently pleasing viscosity in finished liquids.

    We see non-ionic surfactants gain traction, especially for their tolerance to water hardness and salts, but they lack SLES’s dense, stable foam. Manufacturers who blend SLES with lower-foaming agents often find the sweet spot: foam holds up, and the solution remains gentle enough for most hands and fabrics. Our lines have produced both pure and blended products, and feedback always circles back to SLES’s foam and clarity.

    Usage in Real-World Applications

    Walk the floor of a commercial cleaning plant or a personal care liquid line, and SLES bottles and drums are everywhere. Liquid detergents, dish wash, shampoos, bubble baths, and even some liquid hand soaps rely on what SLES brings to the table. Its ease of blending, high active content, and ability to cut oily soils up and down the supply chain make it a core ingredient. Certain industrial applications depend on SLES thanks to its emulsifying character; it doesn’t leave residues and washes free, which matters for textile and fiber processing as much as for kitchen sinks.

    In our line, SLES shines in high-dilution systems. Shampoos and body washes like SLES because it remains soluble, even when marketers add salts to thicken formulas or when fragrance oils threaten stability. We have reformulated entire product lines after feedback pinpointed foaming or rinsability problems—often, it leads back to SLES and its ability to balance mildness with real-world cleaning.

    Down-to-Earth Decisions: Issues and Potential Solutions

    From a manufacturer’s desk, SLES is not without challenges. Environmental and consumer health concerns deserve respect, especially regarding ethylene oxide by-products or residual 1,4-dioxane traces. Our laboratories track these compounds at every batch stage, double-checking sample after sample. Advanced stripping and refining steps help us lower residual levels far below current regulatory thresholds, not as a headline but because our clients demand it, and regulators expect proof.

    Washwater impact calls for attention. Sewage authorities and environmental groups monitor surfactant residues in waterways. Our process teams experiment with more biodegradable blends and improved bioprocesses for wastewater. SLES by itself achieves acceptable breakdown times, and we work closely with downstream wastewater plants to confirm metabolic rates, often sending out product samples for real-world municipal plant trials before any new spec leaves the plant.

    Worker Safety and Handling: Experience Counts

    On a daily basis, our plant crew deals directly with SLES. The concentrate can irritate skin or eyes if not handled with care. We provide full-coverage personal protective equipment, practical handling routines, and training updates tied to each new product batch. The improvement in skin mildness over sodium lauryl sulfate makes routine splashes less likely to result in medical leave, but respect for the chemical remains high on our lists. Spill management and neutralization drills feature on quarterly training schedules because good habits shape plant safety records over years, not weeks.

    Sourcing Matters: Direct Manufacturer’s Perspective

    Direct production brings a clarity you cannot match by moving through traders or distributors. We see orders from global brands as well as rural bottlers, and there’s a pattern—less rework, fewer technical complaints, and more stable supply chains when working straight from the source. Blends that arrive pre-cut from brokers often carry impurities, excess water, or inconsistent salt loads. Running the toll reactor yourself means you decide every variable, from water content to finished product acidity, and it shows in the final shipment.

    Innovation on the Line: Upgrading the Classic SLES

    Clients demand new profiles year after year. Green chemistry makes inroads, and we look at renewable lauryl alcohol sources, test non-ethylene oxide feeds, and examine new catalyst systems that cut by-products. Several pilot studies use bio-based alcohols, producing SLES from palm or coconut fractions with lower process energy. We engage with clients open to field-testing these new grades—even when cost pressure remains persistent. The pathway to improved SLES is technical, but every incremental advance boosts the reliability and reputation built on decades of drum-by-drum output.

    Experience shows not every innovation sticks. Some reformulations lose market traction if they fall short on foaming, clarity, or stability under temperature swings. Maintenance crews on filling lines call out the effect of minor viscosity shifts in high-speed filling—sometimes temperature control or antifoam tweaks solve an issue discovered by a sharp-eyed mixer operator. Feedback loops between the factory and the field accelerate product improvement, with SLES at the core of these cycles.

    Supply Dynamics and Global Reach

    Shipping SLES globally means watching both ends: source feedstock prices and logistical headaches that appear at ports. Price volatility in lauryl alcohol feeds shows up instantly in margin reports. We hedge supply with both contract feeds and spot buying, balancing reliability with cost. Tight delivery promises to global clients mean running extra stock in our warehouses, sometimes adjusting blending queues to prioritize peak-season outputs. We ship to multinational brands and local soap workshops; volume and reliability demand robust process flows and a schedule that can absorb a surprise truck breakdown or shipment hold at customs.

    Support for End Users: Beyond the Order

    Our engineers visit client plants to address real-world blending and filling issues linked to SLES batches. Sometimes, simplicity beats complexity. Instead of chasing small spec sheet advantages, our hands-on process teams recommend troubleshooting by measuring water hardness, checking pH drift, or swapping minor blend alternates. We have years of batch notes linking small tweaks to major performance gains in washing, foaming, or storage stability. Direct advice, not just spec sheets, keeps product complaints low and repeat business strong.

    Communication and Improvement: An Ongoing Process

    We run technical support hotlines and process audits for clients adjusting to new SLES grades or exploring alternatives. Regular check-ins and feedback loops track performance not with abstract terms, but by looking at foaming height, clarity, and shelf life in the market. Our labs use customer tank samples, not just lab blends, when troubleshooting real issues. Achieving consistent end-product depends on this live, day-to-day connection between manufacturer and client. It’s not theory—it’s built on every drum filled and every call answered.

    Trends and Consumer Demand: A Changing Landscape

    Wider consumer awareness pushes the conversation past simple cleaning power. Marketing desks ask about skin-safety data, environmental footprint, and even the feedstock origin. We respond with batch-level traceability, test results, and ongoing R&D projects in greener production lines. The demand for “sulfate-free” or “milder” systems influences some customer requests, but in real practice, SLES remains a fixture thanks to its proven safety and consistent performance in regulated markets. We track regulatory changes and push plant upgrades to meet future caps on trace impurities or new labeling rules, so that our customers land ahead of compliance curves.

    Batch After Batch: Pride in Precision

    The worth of SLES shines through in real-world results, not just spec-sheet numbers. Our operators, chemists, and logistics crews stake reputations on clean, consistent drums ready for loading every week. We’ve fielded the tough calls, learned from real batch failures, and earned the loyalty of global brands aiming for long-run reliability. Through years of technical challenges and laboratory tweaks, SLES has earned its place as a versatile and reliable surfactant—and we, as makers not middlemen, stand behind every kilogram that leaves our gates.

    Looking to the Future

    Years spent on the plant floor confirm that SLES only improves with experience, technical feedback, and open exchange with customers. We’re never far from new requests, new regulatory pushes, or client-driven formula changes. Our outlook still centers on one thing: manufacturing a dependable, adaptable surfactant in a very real world, where quality, safety, and trust matter as much as molecular structure. That’s how every tank gets filled, every batch gets certified, and every customer knows what to expect when a new drum rolls onto the dock.